| Item | PXZ20K-500 | PXZ20K-1000 | PXZ20K-1500 |
|---|---|---|---|
| Maximum settable current *1 | +126 A | +63A | +31.5 A |
| Setting accuracy*2 | ±(0.75 % of rating) | ||
| Resolution | 0.01 A | 0.005A | 0.002 A |
| Line regulation *3 | ±240 mA | ±120mA | ±60 mA |
| Load regulation *4 | ±240 mA | ±120mA | ±60 mA |
| Rise time（TYP）*5 | 1 ms | ||
| Fall time （TYP）*6 | 1 ms | ||
| Response switching | FAST, SLOW | ||
| Slew rate switching *1 | 120A/ms or more *7 | 60A/ms or more *7 | 30A/ms or more *7 |
| 60 A/ms | 30 A/ms | 15 A/ms | |
| 30 A/ms | 15.0A/ms | 7.5 A/ms | |
| 3 A/ms | 1.50A/ms | 0.75 A/ms | |
| 0.3 A/ms | 0.150A/ms | 0.075 A/ms | |
*1. During parallel operation, this will be the value multiplied by the number of units in the configuration. *2. Applies to a range of 1 % to 100 % of the rated current. *3. 180 Vac to 252 Vac for 200 Vac input, 342 Vac to 504 Vac for 400 Vac input. At the constant load. *4. This is the amount of change when the voltage is changed from the rated voltage and rated power to 1/10 of the rated voltage. *5. In the case that the CC mode response setting is set to FAST. The time required for the input current in CC mode to change from 10 % to 90 % of the rated current when the input current
value is changed from 0 % to 100 % of the rated current. When the slew rate is set to MAX. *6. In the case that the CC mode response setting is set to FAST. The time required for the input current in CC mode to change from 90 % to 10 % of the rated current when the input current
value is changed from 100 % to 0 % of the rated current. When the slew rate is set to MAX. *7. MAX will appear on the display.
