Pulse 5b Load Dump Suppressor
SPEC80678
SPEC80678
- Pulse 5b Load Dump Suppressor
- Suppressed voltage: 100 V max. (settable in steps of 0.1 V)
- The waveform required by the standard can be output accurately without changing the pulse width (td) that is set for pulse 5a.
- Complied with ISO7637-2.2004 ISO16750-2.2010 Pulse5a/5b
*The above applies only when Kikusui’s pulse 5a/5b module (KES7750) or an amplifier circuit-based pulse 5a generator is used.
Overview
Are you having trouble with this?
I want to do a Pulse5b test to the ISO7637-2 standard.
I have a load dump tester (Pulse5a), but when I suppress it, the pulse width becomes narrower.
Output voltage can be varied to test the suppressed waveform.
Specifications
Specifications
Open in a new windowZOOM
| Model | SPEC80677 | SPEC80678 |
|---|---|---|
| Load dump suppressor for generating pulse 5b | External-connect type | |
| CDN capacity | DC60Vmax 50Amax | DC60Vmax 100Amax |
| Maximum input surge voltage (Us) | 200V Max | |
| Settable suppressed voltage range (Us*) | 10 to 100 V, in steps of 0.1 V / accuracy:3.0 V | |
| Maximum suction surge current | 300A Max | |
| Maximum suction surge interval | 30 s or more | |
| Driving power | 100VAC to 240VAC 50/60Hz | |
| Power consumption | 90VA or less | |
| Dimensions | 440(17.32”)W×133(5.23”)H×550(21.65”)D mm | |
| Weight | Approx. 17 kg (37.48 lb) | |
*The above applies only when Kikusui’s pulse 5a/5b module (KES7750) or an amplifier circuit-based pulse 5a generator is used.
