| Item | BIM1030 / BIM1100 |
|---|
| Trigger Function | | Select external trigger (EXTERNAL) or internal trigger (INTERNAL). |
|---|
| Trigger delay | | 0 to 9.999 s, OFF |
|---|
| Accuracy | ± 0.2 ms |
|---|
| Average function | The average count can be set between 2 and 99. OFF setting available. |
|---|
| Memory function | Saves up to 100 sets of measurement conditions. |
|---|
| key lock | Locks the key operation. |
|---|
| Zero adjustment | | Zero adjustment of the voltmeter and resistance meter. OFF setting available. Zero point clear function available. |
|---|
| Adjustment range | 1000 digit |
|---|
| Measurement logging and collective transfer function | Records up to 500 sets of measurement logs. Logs can be read collectively. |
|---|
| EOM function | | Outputs an EOM signal from the SIGNAL I/O connector when a measurement is completed. |
|---|
| HOLD | If the trigger source is INTERNAL, it is on after the measurement is finished and until the next measurement is started. If the trigger source is EXTERNAL, it is on after the end of measurement until the next trigger is detected. |
|---|
| PULSE | | Outputs a pulse when a measurement is completed. Pulse width: 1 ms to 99 ms |
|---|
| Accuracy | ± 0.2 ms |
|---|
