| Item | BIM1030 | BIM1100 | ||
|---|---|---|---|---|
| Environment | Installation location | Indoors, 2000 m or less | ||
| Spec guaranteed range | Temperature / Humidity | 18 °C to 28 °C (-4 °F to 158 °F) / 20 %rh to 80 %rh (no condensation) | ||
| Operating range | Temperature / Humidity | 0 °C to 40 °C (32 °F to +122 °F) / 20 %rh to 80 %rh (no condensation) | ||
| Storage range | Temperature / Humidity | -10 °C to 60 °C (-4 °F to 158 °F) / 90 %rh or less (no condensation) | ||
| Power supply | Input voltage range / Input frequency range | 85 Vac to 264 Vac (100 Vac to 240 Vac)/47 Hz to 63 Hz | ||
| Rated power | 30VA | |||
| Isolation voltage | ± 300 V max | ± 1000 V max | ||
| Insulation resistance | 30 MΩ or more (500 Vdc)(between AC LINE and chassis) | |||
| Withstanding voltage | Between the AC LINE and the chassis | 1500 Vac for 1 minute, 10 mA or less | ||
| Between all the mea- surement terminals and the chassis | 2000 Vdc for 1 minute, 1 mA or less | |||
| Between all the mea- surement terminals and SIGNAL I/O | 2000 Vdc for 1 minute, 1 mA or less | |||
| External dimensions / Weight | 214(8.43)W×80(3.15)H×300(11.81)D mm(inches) (Does not include protrusions)/ Approx. 3 kg (6.6 lbs) | |||
| Electromagnetic compatibility (EMC) *1 *2 | Complies with the requirements of the following directive and standards. EMC Directive 2014/30/EU EN 61326-1 (Class A *3), EN 55011 (Class A *3, Group 1 *4), EN 61000-3-2, EN 61000-3-3 | |||
| Safety *1 | Complies with the requirements of the following directive and standards. Low Voltage Directive 2014/35/EU *2 EN 61010-1 (Class I *5, Pollution Degree 2 *6), EN 61010-2-030, EN 61010-031 | |||
*1. Does not apply to specially ordered or modified products. *2. Only on models that have CE/UKCA marking on the panel. *3. This is a Class A instrument. This product is intended for use in an industrial environment. This prod- uct may cause interference if used in residential areas. Such use must be avoided unless the user takes special measures to reduce electromagnetic emissions to prevent interference to the reception of radio and television broadcasts. *4. This is a Group 1 instrument. This product does not generate and/or use intentionally radio-frequen- cy energy, in the form of electromagnetic radiation, inductive and/or capacitive coupling, for the treatment of material or inspection/analysis purpose. *5. This is a Class I instrument. Be sure to ground this product’s protective conductor terminal.The safety of this product is guaranteed only when the product is properly grounded. *6. Pollution is addition of foreign matter (solid, liquid or gaseous) that may produce a reduction of dielectric strength or surface resistivity. Pollution Degree 2 assumes that only non-conductive pollu- tion will occur except for an occasional temporary conductivity caused by condensation.
