B42

Outline

List of products to be assembled using rack mount frame

*When PIA4800 and PIA3200 power supply controller are rank-mounted together with the power supply, the rank mount frame and rack adaptor are necessary to be added depending on the series of the connected power supply.

*1 EIA panel width is 44.45 mm (1 3/4 inch). The panel width does not include the rubber feet, casters, and levelers.
*2 Since there are force-aid cooling intake holes in the side or top and bottom of the mainframe, when mounting in the rack, the blank panel at least 1 panel wide must be installed.
*3 Since those applied models were designed for the type of “Natural Cooling” unit, so it is required to have countermeasure for enough radiation of the heat when used with rack mounting system.

List of products to be assembled using brackets

*When PIA4800 and PIA3200 power supply controller are rank-mounted together with the power supply, the rank mount frame and rack adaptor are necessary to be added depending on the series of the connected power supply.

*1 EIA panel width is 44.45 mm (1 3/4 inch). The panel width does not include the rubber feet, casters, and levelers.
*2 Since there are force-aid cooling intake holes in the side or top and bottom of the mainframe, when mounting in the rack, the blank panel at least 1 panel wide must be installed.
*3 Support angles are included exclusively for our open racks (KRO series).
*4 The dedicated support angle (KRB1-PVS) must be purchased separately when the PVS series is stacked.