PAV Series
よくあるご質問 閲覧ランキング
- 耐電圧(耐圧)試験って何ですか?
- 直流電源を接続する配電盤のブレーカ選定について教えてください。
- 検査票、試験成績書、校正証明書、トレーサビリティ証明書について教えてください。
- 電波法の高周波利用設備に該当する製品はありますか。
- VISAライブラリについて教えてください。
- ウォームアップ時間はどれくらいですか。
- 製品に電安法適用表示(PSEマーク)がありません。違法ではないですか。
- 耐電圧試験器を操作するために、必要な資格はありますか。
- PWR-01シリーズのPOWER スイッチをオンにしても動作しません。どうしたら良いでしょうか。
- 製品におけるPCB含有の有無について教えてください。
- マニュアル通りにコマンドを送っているのですが動作しません。どうしたらよいでしょうか。
- Is the output hold time (at the power outrage) described in the specifications of PAV series?
- Why can’t I increase the voltage of PAV series to the desired value?
- Can I connect a 5V pull up to the ILC pin of PAV series?
- How can I control the output on/off via the external contact of the J3 connector in PAV series?
- How do I control the output voltage by an external resistance on PAV series?
- Can PAV series automatically turn on the output after an instantaneous power failure (within a few seconds)?
- How do I select a circuit breaker for PAV series?
- How much leakage current will flow through PAV series?
- How much is the setting resolution on the LIST and WAVE mode of the advanced output programmable function of PAV series?
- Why can’t I make a connection over a RS232C interface in PAT-T series?
- Can multiple PAVs be controlled via a communication interface?
- Can a relay be connected to the status output terminal (PS_OK signal) of PAV series?
- Can I remove the feet from the bottom of the PAV series?
- Can PAV series turn on the output when the POWER switch is turned on?
- When should I replace the PAV parts as a maintenance?
- Are output voltage and output current monitoring standard functions of PAV series?
- Does PAV series output an alarm signal?
- Does PAV series output a ramp voltage?
- What is the LAN port number on PAV series?
- Do you have any particular application software for PAV series?
- Do you have a command list for PAV series?
- How can I control PAV series via a USB interface?
- How can I control PAV series through a LAN interface by a programmable logic controller (PLC)?
- Why doesn’t the ammeter of PAV series show the current value around 0 A?
- What type of power cord is available in PAV series?





