Firmware Updater
This software is to update the firmware version of the PLZ-5W Series.
Ver.
1.08
Last update
2020/10/26
Configuration
- Applied Products:PLZ-5W Series (Excluding PLZ-5WZ / PLZ-5WH)
Notes
How to use
- You can update the firmware of PLZ-5W by using a USB memory device.
- Save the update files (Update.img and CHECKSUM.md5) in the root directory of the USB memory device. Do not change the name of the update file.
- Press SYSTEM, Admin, and then Firmware Update.
- Insert the USB memory device on which the update files have been saved into the USB port on the front panel, and then press Execute. An update screen appears.
- Press ENTER.
Do not turn off the POWER switch while updating is in progress. Do not remove the USB memory device.
Updating is executed and the PLZ-5W restarts. After restart, remove the USB memory device.
Updating is complete.
Download
Release Notes
Firmware Version 1.08
2020-10-23
IFC1.08.0002
- Resolved issues The problem of freezing after an *RST command is sent while the LOAD OFF timer is operating and the timer times out has been fixed.
- New Feature Option81 has been added to the Request packet of DHCP.
Firmware Version 1.07
2019-10-18
IFC1.07.0001
- Resolved issues Fixed a problem that was causing the PLZ-5W to reboot in rare cases during startup when it was connected to a LAN.
Firmware Version 1.06
2019-03-25
IFC1.06.0001
- Resolved issues This update resolves an issue that made it difficult to respond to INP/OUTP commands or LOAD key if a specific screen is open during synchronous connection.
Firmware Version 1.05
2018-11-22
IFC1.05.0111
- Resolved issues The Synchronized operation driver has been improved at startup. Solved a problem that "Sync Enable" was not displayed.
- Resolved issues Changed reply of "*OPC?" form "+1" to "1".
Firmware Version 1.03
2016-12-22
IFC1.03.0107
- Resolved issues Fixed a problem that was causing the PLZ5W to reset in rare cases when a program was selected after the function mode was changed with an SCPI communication command.
