SD007-PFX (BPChecker3000 V1/V2) V2

Added support for additional model IDs.

Added LAN communication capability to the temperature chamber interface.

Fixed the issue where a test does not complete at the set minimum voltage when the test is performed using an I-V characteristics profile created with the Test Condition Editor.

Fixed the issue where an "element is out of effective range" error occurs when a BPCL3 file is loaded with the Graph Viewer.

This version operates in Windows 11.

Fixed a problem that may not work with CV charging when charging CC-CV using a battery with high impedance.

Fixed a problem that only the maximum cell voltage is not displayed in the test result when OP02-PFX is installed.

Fixed a problem that an incorrect mode is displayed (recorded) when operating in cell CV mode.

Fixed a problem that activated the overvoltage protection (OVP) upon completion of the charge in combination with PWR-01 series.

Fixed a problem when the test was paused and resumed in the last profile, only one profile was excecuted to complete the test regardless of the resuming position.

Fixed a problem that decreased the detection accuracy of the overcharge capacity protection (OAH) (the OAH detection value (capacity: Ah) was rounded down to the nearest integer).

Fixed a problem that required the time to switch profiles under the test condition with many profiles depending on the PC environment.

Fixed a problem that caused an error due to false detection of the option board when the option board was not inserted.

Added support for model Ids that combine power supplies (PWR-01) and electronic loads (PLZ-5W).

Added the “Save the data for Graph Viewer” option to TestExecutive. When the check box is cleared, memory consumption is suppressed, which makes long-term profile operation possible.

Improved the memory usage algorithm and processing speed when a profile is run over a long time period on TestExecutive.

Fixed a problem that was not applying selections correctly when a profile with the Delta Time of Data Record Method set to Fix Time is edited on Test Condition Editor.

Fixed a problem that was displaying an incorrect error code for electronic load alarms.

Fixed a problem that the profile template created before V 2.01 is not displayed.

Fixed a problem that was resetting the unbalanced margin display on the profile screen.

Fixed a problem that was always causing the test to stop with an OTP when I-V characteristic Prof was executed immediately after starting the PFX. (This problem could be reproduced only when a thermometer was not connected to the PFX.)

Added support for the ID7306 model.

Improved the PFX search algorithm on TestExecutive and IoConfig.

Refined the model ID file loading process.

Fixed a problem that was always causing the cell CV to operate during CC-CV charge Prof or pattern Prof and preventing current from flowing when all cell voltage measurements were turned off when an OP board was installed.

Fixed a problem that causing an exception when no channels could be connected during TestExecutive startup.

Fixed a problem that was causing the cell CV function to operate when a given condition was met even when there was no OP board.

Fixed a problem that was preventing programs from proceeding to the next loop if “RestTemp (LastStep)” is enabled in a pattern profile or I-V characteristic profile when there was no thermometer connected (e.g., OPEN).

Redesigned the new text output format. (The two-row column header was changed to one.)

Redesigned the GraphViewer text export function so that the elapsed time column is changed to the total time column.

Added a preset timeout function for temperature chamber synchronization.

Changed the supported KI-VISA version to v5.5.0. (To use temperature chambers, update the KI-VISA version to v5.5.0 or later.)

Added a cell CV function.

Voltage measurement of up to 72 cells is possible by connecting SL01-PFXs.

Drastically improved the operability of Graph Viewer. [Description] • Added an auto creation wizard for I-V characteristic graphs. • Printing can be executed from the shortcut menu. • Improved the operability of moving and zooming data lines. • Redesigned the pane configuration. • Redesigned the shortcut menu. • Redesigned button arrangement.

Drastically improved the print content of Graph Viewer. [Description] • Improved the smudging of graphs during printing. • Redesigned grayscale printing. • Redesigned the print format of test condition and the like.