Environment
| Installation location | Indoors and at altitudes up to 2000 m |
|---|---|
| Warranty range | Temperature 5 °C to 35 °C (41 °F to 95 °F) |
| Humidity 20 %rh to 80 %rh (no condensation) | |
| Operating range | Temperature 0 °C to 40 °C (32 °F to 104 °F) |
| Humidity 20 %rh to 80 %rh (no condensation) | |
| Storage range | Temperature -20 °C to 70 °C (-4 °F to 158 °F) |
| Humidity 90 %rh or less (no condensation) |
Input voltage range
| Nominal voltage range (allowable voltage range) | 100 V to 240 V AC (85 V to 250 V AC) |
|---|---|
| Power consumption at rated load | 30 VA maximum |
| Allowable frequency range | 47 Hz to 63 Hz |
| Insulation resistance | 30 MΩ or more (500 V DC) [AC LINE to chassis] |
| Withstanding voltage | 1390 V AC for 2 seconds, 10 mA or less [AC LINE to chassis] |
| Earth continuity | 25 A AC / 0.1 Ω or less |
Safety *1
Conforms to the requirements of the following standard.
EN 61010-1 (Class I*2 , Pollution degree 2*3 )
*1 Not applicable to custom order models. *2 This instrument is a Class I equipment. Be sure to ground the protective conductor terminal of the instrument. The safety of the instrument is not guaranteed unless the instrument is grounded properly. *3. Pollution is addition of foreign matter (solid, liquid or gaseous) that may produce a reduction of dielectric strength or surface resistivity. Pollution Degree 2 assumes that only non-conductive pollution will occur except for an occasional temporary conductivity caused by condensation
Dimensions (maximum) /Weight
215[8.46 inch] W × 66[2.60 inch] (85[3.35 inch]) H × 230[9.06 inch] (260[10.24 inch]) D mm / Approx. 2 kg (Approx.4.41 lbs)
Accessories
AC power cable: 1 pc. / TL08-TOS high-voltage test leadwires (1.5 m): 1 set / Setup guide: 1 pc. / Quick reference: English: 1pc., Japanese: 1pc. / Safety information: 1 pc. / CD-ROM: 1 pc.
