PIA4810
PIA4810
100,000円 (税込:110,000円)
- Capable of controlling various power supplies and electronic loads.
- Supports multiple channels via a highly extensible slot-in system.
- Equipped with a high-speed serial communication function.
Out of stock
- Features
- Dimensions
- Options
- Downloads
Outline
Supports multiple channels via a slot-in.
The PIA4810 is a power supply controller capable of analog and digital control. It is equipped with the GPIB and RS232C interfaces and 4 slots, which allow 4 each of PIA4800 Series-specific control boards to be installed. A control board is capable of analog control of 2 channels of DC power supplies or electronic loads; a total of 8 channels can be controlled. Moreover, DC power supplies with a digital remote-control function, such as the Kikusui PMR Series, can be directly connected to the PIA4810 via a TP-BUS (twisted pair bus), enabling a maximum of 31 channels to be controlled digitally.
Connection Diagram
Example of connection 2
Power supply control system for 32 channels per one GPIB address using one PIA4810 and three PIA4820s

- When the power supply control system in “Example connection 2” is provided as a basic configuration, the additional use of GPIB addresses allows it to control a maximum of 448 channels. (32 channels x 14 addresses = 448 channels)
- The only models that can be directly connected for control to a power supply controller via a TP-BUS, as in “Example connection 3” or “4”, are DC power supplies with a digital remote-control function.
- When the power supply control system in “Example connection 4” is provided as a basis, the additional use of GPIB addresses allows it to control a maximum of 448 channels. (32 channels x 14 addresses = 448 channels) It is also possible to construct a system with the same connections using the PIA4810. Note:For PMR Series,up to 434 can be controlled. (31 channels x 14 addresses = 434 channels)
- It is limited to use a TP-BUS for connecting up to 3 units of PIA4820. In case, If you wish to connect more than three PAI4820s, please consult with KIKUSUI.
- The total extension length of the TP-BUS for connection is up to 200 m.
- For advice on other connections, please consult with KIKUSUI.