Multifunctional Electronic Load (CC/CV/CR/CP)

PLZ12005WH2

PLZ12005WH2

3,000,000円 （税込：3,300,000円）

  • Operating voltage: 10 V to 1000 V (Min. 1.5 V)
  • 20 kW capacity in a single, compact unit (PLZ20005WH2)
  • 100 kW/ 2000 A with parallel operation (Max. 5 units), connectable with different models.
  • Synchronized operation: Load-on/off control and sequence execution can be synchronized for multiple PLZ-5WH2 series units.
  • Sequence function Program can be saved/loaded via USB memory
  • Arbitrary IV characteristic (ARB) mode
  • New high visibility color display.
  • Data-logging function: voltage/current/power/elapsed time/ integrated current/integrated power measurements. (Measurement display, programmable internal memory, stored as CSV format onto a USB memory.)
  • Superposition of sinusoidal current (sine function, 1 Hz to 10 kHz)
  • Cutoff function: The load can be turned off when the elapsed time, the voltage drop, the integrated current, or the integrated power reaches the specified value.
  • LAN (LXI Compliant)/USB/RS232C standard interface *GPIB optional

LAN LXILAN LXIUKCA
Login to myKIKUSUI / What is myKIKUSUI?
Request for Quotation
カート機能が動くまでの
Save to myKIKUSUI
SKU: PLZ12005WH2

Specifications

Rating
ZOOM
ItemPLZ1005WH2PLZ2005WH2PLZ4005WH2PLZ12005WH2PLZ20005WH2
Operating voltage (DC)10 V to 1000 V
Power1000 W2000 W4000 W12000 W20000 W
Current20 A40 A80 A240 A400 A
DC INPUT terminal’s isolation voltagePositive pin: ±1000 V, Negative pin: ±900 V
Minimum operating voltageAt the rated current10 V
When the current begins to flow1.5 V or less
Constant current (CC) mode
ZOOM
ItemPLZ1005WH2PLZ2005WH2PLZ4005WH2PLZ12005WH2PLZ20005WH2
Operating range0 A to 20 A0 A to 40 A0 A to 80 A0 A to 240 A0 A to 400 A
Selectable range0.0000 A to 20.2000 A0.000 A to 40.400 A0.000 A to 80.800 A0.00 A to 242.40 A0.00 A to 404.00 A
Resolution0.0005 A0.001 A0.002 A0.005 A0.01 A
Setting accuracy ±(0.2 % of setting + 0.1 % of rating)
Parallel operation±（0.4 % of setting + 0.2 % of rating）
Constant resistance (CR) mode
ZOOM
ItemPLZ1005WH2PLZ2005WH2PLZ4005WH2PLZ12005WH2PLZ20005WH2
Operating range *1Range H500 mS to 0 S1 S to 0 S2 S to 0 S6 S to 0 S10 S to 0 S
Range L5 mS to 0 S10 mS to 0 S20 mS to 0 S60 mS to 0 S100 mS to 0 S
Selectable rangeRange H505.00 mS to 0.00 S1.01000 S to 0.00000 S2.02000 S to 0.00000 S6.0600 S to 0.00000 S10.1000 S to 0.0000 S
Range L5.0500 mS to 0.0000 S10.1000 mS to 0.0000 S20.2000 mS to 0.000 S60.600 mS to 0.000 S101.000 mS to 0.000 S
ResolutionRange H0.01 mS0.00002 S0.00005 S0.0002 S0.0002 S
Range L0.0001 mS0.0002 mS0.0005 mS0.002 mS0.002 mS
Setting accuracy*2 Range H±（0.5 % of setting + 0.5 % of rating*3）
Range L±（0.5 % of setting + 0.2 % of rating*3）
Parallel operationRange H±（1.0 % of setting + 1.0 % of rating*3）
Range L±（1.0 % of setting + 0.4 % of rating*3）
Response speedNORM／FAST

* 1. Conductance [S] = input current [A]/input voltage [V] = 1/resistance [Ω] * 2. Converted value at the input current. At the sensing point during remote sensing. * 3. Rated current

Constant voltage (CV) mode
ZOOM
ItemPLZ1005WH2PLZ2005WH2PLZ4005WH2PLZ12005WH2PLZ20005WH2
Operating range10 V to 1000 V
Selectable range0.00 V to 1010.00 V
Resolution0.02 V
Setting accuracy *1 ±（0.05 % of setting + 0.05 % of rating）
Parallel operation±（0.1 % of setting + 0.1 % of rating）
Response speedNORM／FAST

*1. With the input voltage within the operating range, and at the sensing point during remote sensing.

Constant power (CP) mode
ZOOM
ItemPLZ1005WH2PLZ2005WH2PLZ4005WH2PLZ12005WH2PLZ20005WH2
Operating range0 W to 1000 W0 W to 2000 W0 W to 4000 W0 W to 12000 W0 W to 20000 W
Selectable range0.00 W to 1010.00 W0.00 W to 2020.00 W0 W to 4040.00 W0.0000 kW to 12.1200 kW0.0000 kW to 20.2000 kW
Resolution0.02 W0.05 W0.1 W0.0005 kW
Setting accuracy ±(0.5 % of rating *1 + 0.02 A × Vin *2)±(0.5 % of rating *1 + 0.04 A × Vin *2)±(0.5 % of rating *1 + 0.08 A × Vin *2)±(0.5 % of rating *1 + 0.2 A × Vin *2)±(0.5 % of rating *1 + 0.4 A × Vin *2)
Parallel operation±(1 % of power rating + 0.1 % current rating × Vin *2)

* 1. Rated power * 2. DC INPUT terminal voltage or SENSING terminal voltage.

Arbitrary I-V characteristics (ARB) mode
ZOOM
ItemPLZ1005WH2PLZ2005WH2PLZ4005WH2PLZ12005WH2PLZ20005WH2
Operating rangeThree to 100 points of current values can be specified for the input voltage. Linear interpolation is applied between specified points.
Response speed500 μs, 1 ms, 2 ms, 5 ms, 10 ms, 20 ms, 50 ms, 100 ms, or off
Measurement function
ZOOM

Voltmeter

ItemPLZ1005WH2PLZ2005WH2PLZ4005WH2PLZ12005WH2PLZ20005WH2
Display0.00 V to 1000.00 V
Resolution10 mV
Accuracy ±（0.05 % of reading + 0.05 % of rating）
Parallel operation±(0.1 % of reading + 0.1 % of rating) (TYP)

Ammeter

ItemPLZ1005WH2PLZ2005WH2PLZ4005WH2PLZ12005WH2PLZ20005WH2
Display0.000 A to 20.000 A0.000 A to 40.000 A0.000 A to 80.000 A0.00 A to 240.00 A0.00 A to 400.00 A
Resolution0.001 A0.001 A0.001 A0.01 A0.01 A
Accuracy ±（0.2 % of reading + 0.1 % of rating）
Parallel operation±(0.4 % of reading + 0.2 % of rating) (TYP)

Power display

ItemPLZ1005WH2PLZ2005WH2PLZ4005WH2PLZ12005WH2PLZ20005WH2
DisplayDisplays the product of the voltmeter reading and ammeter reading

Measurement trigger

ItemPLZ1005WH2PLZ2005WH2PLZ4005WH2PLZ12005WH2PLZ20005WH2
Trigger SourceImmediate, BUS, DIGITAL2, MSync, TALink, LoadOff
Trigger Count1 to 65536
Trigger Delay0.00000 s to 100.00000 s
IntervalDisable/Enable
Interval Time0.00001 s to 3600 s
Sense Aperture0.00001 s to 1.00000 s
Pulse function
ZOOM
ItemPLZ1005WH2PLZ2005WH2PLZ4005WH2PLZ12005WH2PLZ20005WH2
Operation modeCC and CR
Frequency setting range1.0 Hz to 10.0 kHz
Frequency setting resolution *11 Hz to 10 Hz0.1 Hz
11 Hz to 100 Hz1 Hz
110 Hz to 1000 Hz10 Hz
1.1 kHz to 10.0 kHz0.1 kHz
Frequency setting accuracy1 Hz to 5.0 kHz±（0.5 % of setting）
5.1 Hz to 10.0 kHz±（1.0 % of setting）
Duty cycle setting range, step1 Hz to 10 Hz5.0 % to 95.0 %, 0.1 % steps
11 Hz to 100 Hz
110 Hz to 1000 Hz
1.1 kHz to 10.0 kHz5 % to 95 % *2, 1 % steps

* 1. (Reference) The resolution actually set in the device is period resolution ⊿T = 1 μs, as shown in the equation below. For example, if you specify 9300 Hz, the period set in the device will be n × ⊿T = 108 × 1 μs = 108 μs (where “n” is a number set in the device). Converted to frequency, this becomes 1/108 μs = 9259 Hz. * 2. The minimum time span is 20 μs. The minimum duty cycle is limited by the minimum time span.

Switch value (Depth)

Item *1PLZ1005WH2PLZ2005WH2PLZ4005WH2PLZ12005WH2PLZ20005WH2
CC mode0.0000 A to 20.2000 A0.000 A to 40.400 A0.000 A to 80.800 A0.000 A to 242.40 A0.00 A to 404.00 A
CR modeRange H505.00 mS to 0.00 S1010.00 mS to 0.00 S2020.00 mS to 0.00 S6.06000 S to 0.00000 S10.1000 S to 0.0000 S
Range L5.0500 mS to 0.0000 S10.1000 mS to 0.0000 S20.2000 mS to 0.0000 S60.600 mS to 0.000 S101.000 mS to 0.000 S

*1. The switch value is limited to the set current or set conductance or less.

Slew rate
ZOOM
ItemPLZ1005WH2PLZ2005WH2PLZ4005WH2PLZ12005WH2PLZ20005WH2
Operation modeCC
Operating range0.001 A/µs to 1 A/µs0.002 A/µs to 2 A/µs0.004 A/µs to 4 A/µs0.01 A/µs to 12 A/µs0.02 A/µs to 20 A/µs
Resolution0.00002 A/μs0.00005 A/μs0.0001 A/μs0.0002 A/μs0.0005 A/μs
Setting accuracy *1±（10 % of setting + 20 μs）

*1. Time to change from 10 % to 90 % when the current is changed from 0 % to 100 % of the rated current

Sine function
ZOOM
ItemPLZ1005WH2PLZ2005WH2PLZ4005WH2PLZ12005WH2PLZ20005WH2
Operation modeCC
Frequency setting range1 Hz to 1000 Hz, 2000 Hz, 5000 Hz, 10000 Hz
Frequency setting resolution *11 Hz to 10 Hz1 Hz
20 Hz to 100 Hz10 Hz100 Hz
200 Hz to 1000 Hz
1000 Hz to2 kHz, 5 kHz, 10 kHz
Frequency setting accuracy300 Hz to 900 Hz±（1.0 % of setting）
Other than the frequencies above±（0.5 % of setting）

*1. (Reference) The resolution actually set in the device is period resolution ⊿T= 20 μs, as shown in the equation below. For example, if you specify 900 Hz, the period set in the device will be n × ⊿T = 56 × 20 μs = 1120 μs (where “n” is a number set in the device). Converted to frequency, this becomes 1/1120 μs ≈ 893 Hz.

Soft start
ZOOM
ItemPLZ1005WH2PLZ2005WH2PLZ4005WH2PLZ12005WH2PLZ20005WH2
Operation modeCC
Time setting range500 μs, 1 ms, 2 ms, 5 ms, 10 ms, 20 ms, 50 ms, 100 ms, or off
Alarm function
ZOOM

Alarm 1

ItemPLZ1005WH2PLZ2005WH2PLZ4005WH2PLZ12005WH2PLZ20005WH2
Overvoltage detectionTurns off the load when a voltage that is 110 % of the rating or higher is applied.
Reverse-connection detectionTurns off the load when approximately -1 % of the rated current flows through the DC INPUT terminals.
Overheat detection, overcurrent detection of the front-panel DC INPUT terminalsTurns off the load when the heatsink temperature reaches 100 °C. Or, turns off the load when a current of 30 A or higher is flowing through the front-panel DC INPUT terminals.
Alarm input detectionTurns off the load when a voltage between 0 V and 1.5 V is applied to ALARM INPUT (pin 6) of the EXT CONT connector.
Parallel operation anomaly detectionTurns off the load when any of the following errors occurs. • An error occurs in the communication between the master unit and slave unit during parallel operation. • slave unit’s power supply is interrupted. slave unit’s power supply is interrupted. • An overheating was detected on the master or slave unit. • An overcurrent flows through the front-panel DC INPUT terminals. • PLZ-5WH series or PLZ-5W series is connected as a slave.

Alarm 2

ItemPLZ1005WH2PLZ2005WH2PLZ4005WH2PLZ12005WH2PLZ20005WH2
Overcurrent protection (OCP)Selectable range0.000 A to 22.000 A0.00 A to 44.00A0.00 A to 88.00A0.00 A to 264.00A0.00 A to 440.00A
Resolution0.001 A0.01 A0.01 A0.01 A0.1 A
Protective operationSelect load off or limit.
Overpower protection (OPP)Selectable range0.0 W to 1100.0 W0.0 W to 2200.00 W0 W to 4400 W0.000 W to 13.200 kW0.000 W to 22.000 kW
Resolution0.1 W0.1 W1 W0.001 kW0.001 kW
Protective operationSelect load off or limit.
Undervoltage protection (UVP)Selectable range0.00 V to 1000.00 V, or off.
Resolution0.02 V
Protective operationSelect load off or limit.
Watchdog protection (WDP)Selectable range1 s to 3600 s or off
Protective operationLoad off
Sequence function
ZOOM
ItemPLZ1005WH2PLZ2005WH2PLZ4005WH2PLZ12005WH2PLZ20005WH2
Operation modeCC, CR, CV, CP
Maximum number of programs30
Maximum number of steps10000
Step execution time0.000050 s to 3600000 s (50 µs to 1000 h)
Time resolution1 μs
Integration display
ZOOM
ItemPLZ1005WH2PLZ2005WH2PLZ4005WH2PLZ12005WH2PLZ20005WH2
Elapsed time displayDisplays the time from load on to load off.
Range0 s to 3600000 s (1000 h 0 min 0 s)
Ampere-hour meter displayDisplays integrated current
Range0 Ah to 70000 Ah0 Ah to 140000 Ah0 Ah to 280000 Ah0 Ah to 800000 Ah0 Ah to 1400000 Ah
Watt-hour meter displayDisplays integrated power
Range0 Wh to 40000000 Wh0 Wh to 80000000 Wh0 Wh to 160000000 Wh0 Wh to 500000000 Wh0 Wh to 800000000 Wh
Cutoff function
ZOOM
ItemPLZ1005WH2PLZ2005WH2PLZ4005WH2PLZ12005WH2PLZ20005WH2
Elapsed timeThe load turns off when the elapsed time value reaches the specified value.
Range0 s to 3600000 s (1000 h 0 min 0 s)
Resolution1 s
Integrated currentThe load turns off when the ampere-hour meter value reaches the specified value.
Range0 Ah to 70000 Ah0 Ah to 140000 Ah0 Ah to 280000 Ah0 Ah to 800000 Ah0 Ah to 1400000 Ah
Resolution0.001 mAh (0.000 mAh to 1000.000 mAh) 0.001 Ah (1.001 Ah to 1000.000 Ah) 0.001 kAh (1.001 kAh to 1 000.000 kAh) 0.001 MAh (1.001 MAh to 1.400 MAh)
Integrated powerThe load turns off when the watt-hour meter value reaches the specified value.
Range0 Wh to 40000000 Wh0 Wh to 80000000 Wh0 Wh to 160000000 Wh0 Wh to 500000000 Wh0 Wh to 800000000 Wh
Resolution0.001 Wh (0.000 Wh to 1 000.000 Wh) 0.001 kWh (1.001 kWh to 1 000.000 kWh) 0.001 MWh (1.001 MWh to 800.000 MWh)
Voltage dropThe load turns off when the voltmeter value becomes less than or equal to the specified value.
Range0.00 V to 1000.00 V
Resolution0.02V
Other functions
ZOOM
ItemPLZ1005WH2PLZ2005WH2PLZ4005WH2PLZ12005WH2PLZ20005WH2
Remote sensingInput voltage rating *11000 V *2
Isolation voltage± 1000 V
Number of units in parallel operation5 units
Mutual synchronized operation *3Synchronizes load on/off. Synchronization of sequence execution, and sequence resumption. Synchronizing the recording timing of measured values.

* 1. There are limitations depending on the actual power that the load consumes. * 2. Total potential difference between the DC INPUT terminals and SENSING terminals * 3. The terminals for mutual synchronized operation are isolated from the DC INPUT terminals and operate at the chassis potential.

EXT CONT connector
ZOOM
Item *1PLZ1005WH2PLZ2005WH2PLZ4005WH2PLZ12005WH2PLZ20005WH2
Load on/off control inputLogic level switchable. Pulled up to 5 V by a 10 kΩ resistor. The thresholds are HIGH: 3.5 V to 5 V, LOW: 0 V to 1.5 V.
Alarm inputAn alarm is activated with a voltage between 0 V and 1.5 V. Pulled up to 5 V by a 10 kΩ resistor. The thresholds are HIGH: 3.5 V to 5 V, LOW: 0 V to 1.5 V.
Alarm clearing inputAfter an alarm occurs, eliminate the root cause of the alarm, and change the input to pin 5 of the EXT CONT connector from a low level signal to a high level signal. The alarm will be cleared on the rising edge of this signal. Pulled up to 5 V by a 10 kΩ resistor. The thresholds are HIGH: 3.5 V to 5.0 V, LOW: 0 V to 1.5 V.
Trigger inputPaused sequence operation resumes when a voltage between 0 V and 0.66 V is received. Pulled up to 5 V by a 10 kΩ resistor. The thresholds are HIGH: 2.31 V to 3.3 V, LOW: 0 V to 0.66 V.
External voltage control input(CC, CR, CP mode)Controls the load settings of CC, CR, CP mode through external voltage input. Input impedance: Approx. 10 kΩ. CC: The setting can be controlled in the range of 0 % to 100 % of the rated current through external voltage input of 0 V to 10 V. CR: The setting can be controlled in the range of 0 % to 100 % of the conductance setting through external voltage input of 0 V to 10 V. CP: The setting can be controlled in the range of 0 % to 100 % of the rated power through external voltage input of 0 V to 10 V.
Setting accuracy±(1 % of rating) (TYP value in CC mode)
External voltage control input (CV mode)The load setting of CV mode can be controlled through external voltage input. The rated voltage can be controlled in the range of 0 % to 100 % with 0 V to 10 V. Input impedance: Approx. 10 kΩ.
Setting accuracy±(1 % of rating) (TYP)
External voltage control input (superimposing in CC mode)Controls the load setting of CC mode by adding current through external voltage input. Adds current in the range of -100 % to 100 % of the rated current for -10 V to 10 V.Input impedance: Approx. 10 kΩ.
Setting accuracy±(1 % of rating) (TYP)
Load-on status outputOn when load is on. Open-collector output from a photocoupler. *2 *2
ALARM 1 outputON when overvoltage detection, reverse-connection detection, overheat detection, front-panel DC INPUT overcurrent detection, alarm input detection, or parallel operation anomaly detection is activated. Open-collector output from a photocoupler. *2 *2
ALARM 2 outputTurns on when OCP, OPP, UVP, or WDP is activated. Open-collector output from a photocoupler. *2
DIGITAL 0 outputCan be controlled through sequences. Output impedance: Approx. 330 Ω. The thresholds are HIGH: 2.5 V to 3.3 V, LOW: 0 V to 0.4 V.
DIGITAL 1 output
DIGITAL 2 input/outputInput/output switchable. Output: Sequence trigger output. The output impedance is 330 Ω.The thresholds are HIGH: 2.5 V to 3.3 V, LOW: 0 V to 0.4 V. Input: Trigger input signal for the sequence and the measurement functions. The thresholds are HIGH: 2.31 V to 3.3 V, LOW: 0 V to 0.66 V
Current monitor outputOutputs 0 V to 10 V for 0 % to 100 % of the rated current. Output impedance: 1 kΩ (TYP).
Accuracy±(1 % of rating) (TYP)

* 1. 1000 V reinforced insulation between each terminal and the DC INPUT terminal * 2. The maximum voltage that can be applied to the photocoupler is 30 V. The maximum current is 4 mA.

BNC connector
ZOOM
ItemPLZ1005WH2PLZ2005WH2PLZ4005WH2PLZ12005WH2PLZ20005WH2
Trigger outputTransmits 10 μs pulses during step execution when trigger output is set in a sequence. Transmits 10 μs pulses during pulse operation and sine operation. Output impedance: 200 Ω, output voltage HIGH: 4.2 V to 5.0 V, LOW: 0 V to 0.4 V.
Current monitor outputOutput voltageOutputs 0 V to 10 V for 0 % to 100 % of the rated current
Output impedance50 Ω (TYP)
Accuracy±(1 % of rating)
Voltage monitor outputOutput voltageOutputs the measured voltage with 1/100 magnification from 0 V to 10 V.
Output impedance50 Ω (TYP)
Accuracy±(1 % of rating)
Isolation voltage± 30 V
Communication function
ZOOM
ItemPLZ1005WH2PLZ2005WH2PLZ4005WH2PLZ12005WH2PLZ20005WH2
RS232CHardwareD-SUB 9-pin connector. Baud rate: 9600, 19200, 38400, 115200 bps. Data length: 8 bits, Stop bits: 1 bit, Parity bit: None Flow control: No, CTS/RTS
Message terminatorLF during reception, LF during transmission.
USB (device)HardwareStandard type B socket. Complies with the USB 2.0 specification. Data rate: 480 Mbps (High Speed).
Message terminatorLF or EOM during reception, LF + EOM during transmission.
Device classComplies with the USBTMC-USB488 device class specifications
USB (host)HardwareStandard type A socket Complies with the USB 2.0 specification. Data rate: 480 Mbps (High Speed).
LANHardwareIEEE 802,3 100Base-TX/10Base-T Ethernet IPv4, RJ-45 connector.
Compliant standardsLXI 1.4 Core Specification 2011
Communication protocolVXI-11, HiSLIP, SCPI-RAW, SCPI-Telnet
Message terminatorVXI-11, HiSLIP: LF or END during reception, LF + END during transmission. SCPI-RAW: LF during reception, LF during transmission.
General specifications
ZOOM
ItemPLZ1005WH2PLZ2005WH2PLZ4005WH2PLZ12005WH2PLZ20005WH2
Input voltage range100 Vac to 240 Vac (90 Vac to 250 Vac) single phase
Input frequency range47 Hz to 63 Hz
Power consumption70 VAmax90 VAmax150 VAmax360 VAmax590 VAmax
Inrush current (peak value)100 Vac30 Amax30 Amax30 Amax40 Amax40 Amax
230 Vac80 Amax80 Amax80 Amax160 Amax160 Amax
Leakage current*10.5 mA or less0.6 mA or less0.8 mA or less1.6 mA or less2.4 mA or less
Environmental conditionsOperating temperature range0 °C to 40 °C (32 °F to 104 °F)
Operating humidity range20 %rh to 85 %rh (no condensation)
Storage temperature range-25 °C to 60 °C (-13 °F to 140 °F)
Storage humidity range90 %rh or less (no condensation)
Installation locationIndoor use, altitude of up to 2000 m, overvoltage category II
Insulation resistanceBetween primary and chassis, input, monitor terminals1000 Vdc, 30 MΩ or more (70 %rh or less)
Between input terminals and chassis, monitor terminal1000 Vdc, 3 MΩ or more (70 %rh or less)
Withstanding voltageBetween primary and chassis, input, monitor terminalsNo abnormalities at 1500 Vac for 2 s
Between input terminals and chassis, monitor terminalNo abnormalities at 1500 Vac for 2 s
WeightApprox. 13 kg (28.66 lb)Approx. 16 kg (35.3 lbs)Approx. 20 kg (44.1 lbs)Approx. 64 kg (141.1 lbs)Approx. 93 kg (205 lbs)
Accessories[Common to all models] Power cord (1 pc., length: 2.5 m), Safety terminal adapter TL41 (red 1 set, black 1set), External control connector kit (1 set), Safety Information (1 copy), Setup Guide (1 copy), Quick Reference (Japanese 1 sheet, English 1 sheet), CD-ROM (1 disc) [PLZ1005WH2, PLZ2005WH2, PLZ4005WH2] Rear-panel DC INPUT terminal cover (1 set), Screw set for rear-panel DC INPUT terminals (2 sets), Screws for the rear-panel DC INPUT terminal cover (2 pcs.) , Front-panel DC INPUT terminal cover (1 pc.), Screws for the front-panel DC INPUT terminals (2 pcs.) , Heavy object warning label (1 pc.) PLZ4005WH2 only [PLZ12005WH2, PLZ20005WH2] Rear-panel DC INPUT terminals cover (1 set), Screw set for rear-panel DC INPUT terminals (2 sets), Rear-panel DC INPUT terminals cover screws (2 pcs.), Heavy object warning label (1 pc.), Parallel operation signal cable kit [PC02-PLZ-5W]
Electromagnetic compatibility (EMC) *2 *3Conforms to the requirements of the directive and standard below. EMC Directive 2014/30/EU EN 61326-1 (Class A *4), EN 55011 (Class A *4, Group 1 *5), EN 61000-3-2, EN 61000-3-3 Applicable under the following conditions The maximum length of all cabling and wiring connected to the product must be less than 3 m.
Safety *2Conforms to the requirements of the directive and standard below. EMC Directive 2014/35/EU *3 EN 61010-1 (Class I *6, Pollution Degree 2 *7)

* 1. Leakage current between the positive and negative terminals of the rear-panel DC INPUT. At 1000 Vdc. * 2. Does not apply to specially ordered or modified products. * 3. Limited to models that have a CE mark on their panels. * 4. This is a Class A instrument. This product is intended for use in an industrial environment. This product may cause interference if used in residential areas. Such use must be avoided unless the user takes special measures to reduce electromagnetic emissions to prevent interference to the reception of radio and television broadcasts. * 5. This is a Group 1 instrument. This product does not generate and/or use intentionally radio-frequency energy, in the form of electromagnetic radiation, inductive and/or capacitive coupling, for the treatment of material or inspection/analysis purpose. * 6. This is a Class I instrument. Be sure to ground this product’s protective conductor terminal. The safety of this product is guaranteed only when the product is properly grounded. * 7. Pollution is addition of foreign matter (solid, liquid or gaseous) that may produce a reduction of dielectric strength or surface resistivity. Pollution Degree 2 assumes that only non-conductive pollution will occur except for an occasional temporary conductivity caused by condensation.

Operation Manuals

PLZ-5WH2
Icon
0.00 KB
LOGIN REQUIRED

    Please feel free to contact us with any questions or concerns.

    Download a Product Catalog View List
    Request a Quotation Contact Us
    close

    Search