PLZ1004W
PLZ1004W
500,000円 （税込：550,000円）
- Four different power ratings – 165 W, 330 W, 660 W, and 1000 W – five models in total
- Support of 0-V input (PLZ164WA and PLZ664WA)
- High-speed response supporting a maximum slew rate of 16 A/µs (equivalent to 10 µs when converted to a rise time)
- Support of constant current, constant resistance, constant voltage, constant power, constant current + constant voltage, and constant resistance + constant voltage modes
- Timer functions combined with time/voltage measurement functions enable battery discharge characteristic evaluations.
- Booster units provide increased system capacity (PLZ1004W).
- Features sequence and switching functions.
- Provided with GPIB, RS232C, and USB 2.0 ports as standard.
Out of stock
カート機能が動くまでの
- Dimensions
- Options
- Downloads
Dimensions(mm)
Type
II（PLZ664WA／PLZ1004W／PLZ2004WB）Options
Booster unit for PLZ1004W
PLZ2004WB
Operating voltage: 1.5 to 150 V Current: 400 A Power: 2000 W Input power supply voltage range: 100 to 240 VAC (90 to 250 VAC), single-phase connection Power consumption: Max. 200 VA Weight: Approx. 23 kg Dimensions: 429.5 (455) mm W × 128 (150) mm H × 550 (600) mm D
Parallel operation cables
PC02-PLZ-4W
Parallel operation cable
Parallel cable (for between main unit and booster, approx. 55 cm)
PC01-PLZ-4W
Parallel operation cable
Parallel cable (between main unit and booster, approx. 30 cm)
Accessory Kit
OP01-PLZ-4W
Accessory Kit for PLZ-4W/4WH series. Used for the connection of J1 Connector on the rear panel when operating by external control. Contents: Connector, Semi-cover, Pin(20 sets)
Rack Mount Brackets
KRB150-TOS
The bracket can be used to install models of 1 (1/1) rack in width directly in the rack.
KRB3-TOS
The bracket can be used to install models of 1 (1/1) rack in width directly in the rack.
Sequence Creation Software
Wavy for PLZ-4W (SPEC70181A)
Ver.5.3 Easy creation and editing of test condition data required for sequence operation Test condition data file saving function facilitates condition management for routine tests Execution graphs” allow the user to check the progress of the execution sequence. "Monitor Graph" enables intuitive observation of actual output Acquired monitoring data can be saved as test results
Downloads
Product Catalog
2D CAD Data
Base view | PDF
Base view | PDF
Base view | DXF
Base view | DXF
Outline | PDF
Outline | PDF
Outline | DXF
Outline | DXF
Operation Manuals
PLZ_4W
